These articles explain three important modules that can be required in our daily activities.
Modules are
- DC BOOST XL6009 DC-DC BOOSTER STEP-UP MODULE
- 12V/24V to 5V 3A power supply module
- DC-DC BOOST MODULE 0.9V ~ 5V
Feature :
DC BOOST XL6009 DC-DC BOOSTER STEP-UP MODULE
This CN6009 XL6009 DC-DC Step-up converter module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency.
The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577.
It equips 4A high-efficiency MOSFET switches, so as to provide a conversion efficiency of up to 94%.
- Model/The name of the： XL6009 DC - DCThe booster module
- The input voltage：(minimum 5 v to 3 v normal) ~ 35 v
- The output voltage：6 v ~ 45 v
- The output current：4 a(Max)
- Conversion efficiency：92%(highest)
- The output ripple：30 mv
- Switching frequency：65 kHz
- Working temperature：- 45°~ + 85°
XL6009 boost module at a lower cost, superior performance.
High switching frequency 400KHz, you can use small-capacity filter capacitors that can achieve very good results, the ripple is smaller and smaller.
This module helps to output 5 v for any device from 12-24 to 5,
use this module in the car for output 5v enable.
- Input Voltage:DC 4.5-24V
- Output Voltage: integration adjustable and fixed output, back side can choose fixed output voltage
- Adjustable Range: 0.8-17V, fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)
- Output Current:3A (max),actual testing input 12V output 1.5A
- Transform Efficiency:97.5%(max) (6.5 to 5V 0.7A)
- Switch Frequency:500KHz
- Output Ripple Wave:20mV (12V to 5V 3A) 20m bandwidth
- Operating Voltage:-40 Celsius-85 Celsius
- Output Overvoltage Protection: no
- Static Current:0.85MA
- Load Adjust Rate:±1%
- Voltage Adjust Rate:±0.5%
- Dynamic Response Speed:5% 200uS
- Output Short Circuit Protection: yes
- Input Transposition Protection:no
- Enable Control: yes
- Connecting Type: soldering
- Input Way: soldering
- Output Way: soldering/pin
- Soldering Hole Space:2.54mm
DC-DC BOOST MODULE 0.9V ~ 5V
The input 0.9V ~ 5V any DC voltage, can be stable output 5V DC voltage, with two AA battery input can output 500 ~ 600MA current, a single AA battery power output can be about 200ma current for mobile phones, Cameras, microcontrollers, digital products.
When you travel or travel always feel your cell phone, MP3, MP4, PDA, PSP is not enough electricity, and you have extra batteries, you can consider their own DIY a mobile power; This module with your [a lithium or 2-3 Ni-MH] can output 5V voltage for your cell phone, MP3, MP4, PDA, PSP charging, very simple and convenient.
If you need a different voltage in the product design, power supply, equipment, or 5V power supply, using this module will be your best choice. When your power supply is very unstable, when high and low, but when you need 5V power supply equipment, then we use this module will be your best choice.
- Input voltage: 1V ~ 5V
- Output voltage: 5V
- Output current: 500mA
- PCB size: 17.55mm * 25.22mm * high 5.85mm (not including USB height)
- Block size: 17.55 * 32.53mm * High 8.3mm (including USB height)
- Output voltage: 5V
- Output current: 500mA
- PCB size: 17.55mm * 25.22mm * high 5.85mm (not including USB height)
- Block size: 17.55 * 32.53mm * High 8.3mm (including USB height)
- with USB female, versatile
- high conversion efficiency, up to 96%
- ultra-small size, with the installation of a variety of small equipment
See the full video overview of how to work...
Follow the page to see any update
Subscribe channel to see more